Table of Contents
Advertisement
Installing Cartridges
Warning: Never install or remove a
cartridge when BOOKMAN is on. If
you do, information that you entered
in its built-in book and in an installed
cartridge will be erased.
1. Turn BOOKMAN off.
2. Turn BOOKMAN over.
3. Align the tabs on the book
cartridge with the notches in
the slot.
4. Press the cartridge until it
snaps into place.
Removing Cartridges
Warning: When you remove a
book cartridge to install another,
information that you entered in the
removed cartridge will be erased.
Selecting Books
Once you have installed a book car-
tridge in your BOOKMAN, you must
select which book you want to use.
1. Turn BOOKMAN on.
2. Press
CARD
These are sample books.
3. Press
or
book you want to use.
4. Press
ENTER
Resuming Where You Left Off
You can turn off BOOKMAN at
any screen. When you turn
BOOKMAN on again, the screen
that you last viewed appears.
3
.
to highlight the
to select it.
Advertisement
Table of Contents
