Installing the batteries
This unit is powered by 2 main CR2032 batteries
and the databank memory is powered by 1
CR2032 battery. The unit begins to dim when the
battery power is low. When this happens, replace
the 2 main batteries immediately. To install or
replace the main batteries do the following.
Main battery
compartment
Database memory
battery
compartment
Replacing the Main Batteries
1. Turn the unit off.
2. Turn the unit over.
3. Slide the tab of the battery compartment
lock to the unlock position.
4. Lift the battery cover up and off.
5. Remove the old batteries and insert the
new batteries with the positive (+) sides
facing up.
6. Replace the cover.
7. Return the tab to the lock position.
3
Main battery
compartment lock