Table of Contents
Advertisement
Installing Cartridges
Warning: Never install or remove a
cartridge when your BOOKMAN is
turned on. If you do, information that
you entered in its built-in book and in
an installed cartridge will be erased.
1. Turn BOOKMAN off.
2. Turn BOOKMAN over.
3. Align the cartridge tabs with
the notches in the slot.
4. Press the cartridge until it
snaps into place.
Removing Cartridges
Warning: When you remove a
cartridge to install another cartridge,
information that you entered in the
first cartridge will be erased.
Selecting Books
Once you have installed a cartridge in
your BOOKMAN, you must select
which book you want to use.
1. Turn BOOKMAN on.
2. Press
CARD
These are sample books.
3. Press
or
the book you want.
4. Press
ENTER
Auto Shutoff & Auto Resume
If you forget to turn off your BOOKMAN,
it will automatically shut off in two minutes.
Also, you can turn off BOOKMAN at
any screen. When you turn BOOK-
MAN on again, the screen that you
last viewed will appear.
3
.
to highlight
to select it.
Advertisement
Table of Contents
