Sending Words Between Books; Resetting Bookman - Franklin BOOKMAN ENC-2005 User Manual

Sending Words Between Books

You can look up words from this
book in certain other BOOKMAN
books, and vice versa.
To send or receive a word to or from
another book, you must have in-
stalled a book cartridge in your
BOOKMAN that is able to send or
receive words, too. To learn if a book
cartridge can send or receive words,
read its User's Guide.
1. Highlight a word in this book.
To highlight a word in a list, press
the arrow keys.
To highlight a word in text, press
and then press the arrow
ENTER
keys.
2. Hold and press
3. Highlight the other book.
4. Press
ENTER
The word that you highlighted ap-
pears in the other book.
5. Press
ENTER
word.
.
CARD
.
to look up the

Resetting BOOKMAN

If the BOOKMAN keyboard fails to re-
spond, or if its screen performs errati-
cally, first press
twice. If nothing happens, follow
ON/OFF
the steps below.
Warning: Pressing the reset button
with more then very light pressure may
permanently disable your BOOKMAN.
In addition, resetting BOOKMAN erases
settings and information entered into its
built-in book and in any installed cartridge.
1. Hold
CLEAR
If nothing happens, try Step 2.
2. Use a paper clip to gently press
reset button on BOOKMAN.
The reset button is recessed in a pin-
sized hole on the back of the BOOK-
MAN. Look for it on the battery
cover or near the cartridge slot.
Troubleshooting Tips
• Check that the cartridge,
if any, is installed correctly.
• Check that the cartridge's metal
contacts are dirt-and dust-free.
12
and then press
CLEAR
and press
ON/OFF
.