Operation; Safety Guidelines In Operation - Siemens SIMOTICS FD 1LH1 Operating Instructions & Installation Instructions

Operation

When carrying out any work on the machine, observe the general safety instructions
(Page 15) and the specifications contained in EN 50110‑1 regarding safe operation of electrical
equipment.
8.1

Safety guidelines in operation

Live parts
Terminal boxes accommodate live parts and components. If you open the terminal box cover,
this can result in death, serious injury or material damage.
● When the machine is in operation, the terminal boxes must remain closed at all times.
Rotating and live parts
Rotating or live parts are dangerous. If you remove the required covers, this can result in
death, serious injury or material damage.
● Any covers that prevent live electrical or rotating parts from being touched, ensure
Fire hazard resulting from hot surfaces
Certain parts of the machine become hot during operation. Severe burns can result from
contact with these parts.
● Check the temperature of parts before touching them. If required, apply suitable protective
● Allow the machine to cool before starting work on the machine.
SIMOTICS FD 1LH1
Operating Instructions 04/2016
WARNING
Terminal boxes may be opened only when the machine is stopped and de-energized.
WARNING
compliance with a particular degree of protection or are required for ensuring proper air
flows, and hence effective cooling, must not be opened during operation.
WARNING
measures.
8
111