List Of Paper That Can Be Used; Paper That Cannot Be Used - Epson ColorWorks CW-C6000 Series User Manual

Cautions on printing the continuous label by using the auto cutter model
• Remove the printed labels that are remaining in the paper ejection slot. If you continue with
printing while the labels are still remaining in the paper ejection slot, the printed labels may be
cut in double, or the paper may be jammed.
• The label adhesive may adhere to the cutter, and deteriorate its cutting ability. If it becomes
difficult to cut the paper, it is recommended to clean the auto cutter.
Q
NOTE
(U"Cleaning the Auto Cutter (Auto Cutter Model Only)" on page
Cautions on using a die-cut label
Depending on the shape of die-cut labels, the labels may peel off their backing paper inside the
printer. In such a case, it is nece ssary to operate a detector. For details on how to operate the
detector, refer to the CW-C6000 Series/CW-C6500 Series Technical Reference Guide.

List of Paper That Can Be Used

Paper shapes
Roll paper
Fanfold paper

Paper That Cannot Be Used

Do not load paper like the following. Such paper will cause paper jams and print stains.
Thermal paper
Forms of paper
Continuous label (with black marks)
Continuous label (without black marks)
Die-cut labels (with black marks)
Die-cut labels (without black marks)
Die-cut labels (with black marks)
Paper joined together by
tape, etc.
Paper of A size, B size, etc.
Before use
55)
Paper types
Matte Paper
Synthetic
Glossy Paper
Glossy Film
High Glossy Paper
Paper with transparent
backing paper
17