Transceiver Unit; Permitted Mounting Positions - Siemens SIMATIC IFP1200 V2 Product Information

The following figures show central assembly and assembly to the right-hand side of the strain
relief plate as examples.
Strain relief plate, positioned in the center,
3.1.3

Transceiver Unit

3.1.3.1

Permitted mounting positions

The following mounting positions are permitted for the Transceiver Unit:
Mounting on the rear
The Transceiver Unit can be mounted on a DIN rail or on a wall using screws.
The interfaces of the Transceiver Unit should always point downwards.
IFP V2 built-in devices and Transceiver Unit UL hazardous information
Product Information, 12/2023, A5E53493649-AA
2 screws
Installing and connecting the device
3.1 Preparing for installation
Strain relief plate, positioned to the right,
3 screws
Mounting on one side
15