Continued from page 88.
Use the ▲▼ buttons and select the
sound data to register.
You can play the sound by pressing the
REVIEW button.
Press the FLASH button.
A copy confirmation request message will appear.
If the camera is low on memory space, the new sound
cannot be copied. Delete the old sound first, then
copy the new one.
Press the MACRO button.
The new sound is copied to the camera. To cancel
this operation, press the FLASH button.
If (in step 6 above) there is not enough memory space for new sounds, delete
the old sounds as follows:
Continued from page 88.
Use the ▲▼ buttons and select the
sound data to delete.
You can play the sound by pressing
the
REVIEW button.
Press the MACRO button.
A delete confirmation request appears.
Press the FLASH button.
The sound data is deleted.
REGISTER SOUND DATA
DELETE SOUND DATA
89