TEST PRINTING FOR NOZZLE CHECK
You can use the "Nozzle Check" to test the printer when there is a problem
with the printed image.
Continued from page 79.
Use the ▲▼ buttons and select
"Nozzle Check."
Press the MENU button or the MACRO button to
return to step ② .
Press the FLASH button.
The messge "Print a Nozzle Check pattern? Load A4 or Letter size paper." will appear
on the monitor. Place the paper in the printer and then press the FLASH button to
print the Nozzle Check pattern.
To check the printed Nozzle Check pattern, or to fix any gaps, refer to the instructions
provided with your printer.
If the printer you are using does not support the Nozzle Check feature, the message "This
function cannot be performed from the camera with the printer you are using." will appear on
the monitor. In this case refer to the printer manual.
If the printed images appear smudged or the printing is patchy, use this utility
to clean the printer head.
Continued from page 79.
Use the ▲▼ buttons and select
"Head Cleaning."
Press the MENU button or the MACRO button to
return to step ② .
Press the FLASH button.
At this time the message "Clean the print head?" will appear on the monitor.
Press the FLASH button to begin the head cleaning process.
If the printer you are using does not support the Head Cleaning feature, the message "This
function cannot be performed from the camera with the printer you are using." will appear on
the monitor. In this case refer to the printer manual.
80
HEAD CLEANING