Register / Delete Sound Data - Epson L-400 User Manual

You can use the same procedures to change both shutter sound and photo-
preparation sound.
Use the ▲▼ buttons and select
Shutter Sound or Focus Lock Sound
or Self Timer Sound.
Use the
You can select the item in the order as beep sound → sound1 → sound2.
You can register sound1 and sound2.
Press the FLASH button.
The sound data registered in the camera body is
displayed.
Use the
sound data in the memory card.
The next steps are all continued from
If the sound data had the same name as one in the camera body, a message on
overwriting confirmation will be displayed. Press the FLASH button to confirm
the new sound with replacing the old sound of the same number.
88
REGISTER / DELETE SOUND DATA
Turn the DIAL SWITCH to SET UP MODE and
then turn the POWER ON.
The SETUP menu will appear on the LCD monitor.
buttons and select the item to change.
button and display the
.