Table of Contents
Advertisement
PRINTER UTILITIES
You may use a range of supported printer utilities.
PRINTER UTILITIES
Turn the DIAL SWITCH to PLAYBACK MODE and
then turn the POWER ON.
MENU button
PRINT button
MACRO button
1.
Press the
PRINT button to change the display to DIRECT
PRINTING mode.
Press the
MACRO button to return to PLAYBACK mode.
2.
Use the ud buttons to select the print option, then press the
button.
3.
Press the MENU button or the
SETUP.
Press the MENU button or the
4.
Press the r button to go to the "Utility" screen.
Press the l button to go to the 'Print Setup' screen.
The next steps are all continued from step
44
DIRECT PRINTING
l button
u button
r button
d button
FLASH button
FLASH button to go to PRINT
MACRO button to return to step
5
.
TEST PRINTING FOR NOZZLE CHECK
You can use the "Nozzle Check" to test the printer when there is a problem
with the printed image.
5.
Use the ud buttons and select "Nozzle Check".
Press the MENU button or the
6.
Press the
FLASH button.
The message "Print a Nozzle Check pattern? Load A4 or Letter size
paper." will appear on the monitor. Place the paper in the printer and
then press the
To check the printed Nozzle Check pattern, or to fix any gaps, refer to the
instructions provided with your printer.
ALERT
If the printer you are using does not support the Nozzle Check feature, the message
"This function cannot be performed from the camera with the printer you are using."
will appear on the monitor. In this case refer to the printer manual.
HEAD CLEANING
If the printed images appear smudged or the printing is patchy, use this
utility to clean the printer head.
5.
Use the ud buttons and select "Head Cleaning".
Press the MENU button or the
PRINT
6.
Press the
FLASH button.
At this time the message "Clean the print head?" will appear on the
monitor.
2
Press the
FLASH button to begin the head cleaning process.
.
ALERT
If the printer you are using does not support the Head Cleaning feature, the message
"This function cannot be performed from the camera with the printer you are using."
will appear on the monitor. In this case refer to the printer manual.
MACRO button to return to step
FLASH button to print the Nozzle Check pattern.
MACRO button to return to step
2
.
2
.
Advertisement
Table of Contents
