Snom M10R KLE Quick Installation Manual page 12

Sip dect 4-line rugged handset
Hide thumbs Also See for M10R KLE:
Table of Contents

Advertisement

To install the handset battery:
1. Rotate the dial on the back of the handset to the unlock position
the battery cover down to remove it..
2. Plug the battery connector securely into the socket inside the handset battery
compartment. Insert the supplied battery with the label THIS SIDE UP facing up
as indicated.
3. Align the battery cover flat against the battery compartment, then slide it
upwards.
4. Rotate the dial on the back of the handset to the lock position
5. Charge the handset by placing it face forward in the charger. The battery icon
indicates the charge status as the battery charges.
IMPORTANT INFORMATION
Use only the supplied rechargeable battery or replacement battery
(model BT264392). To order a replacement battery, visit our website at
www.snomamericas.com
If you do not use the handset for a long time, disconnect and remove the battery
to prevent possible leakage.
Very low battery charging
less than 30 minutes.
Charging 30 to 80 minutes.
Charging 80 minutes
to 7 hours.
Charging more than 7 hours.
Fully charged at 11 hours.
.
12
, and slide
.

Advertisement

Table of Contents
loading

Table of Contents