Operational Reliability And Monitoring - Pepperl+Fuchs IDENT-I system P IPT FP Series Manual

IPT*-FP WITH U-P6-B5-V
Safety
3.4

Operational reliability and monitoring

The devices IPT*-FP and U-P6-B5-V of the inductive identification system IDENT-I system P
operate on a microprocessor level. Device status is reported via LEDs on the front side on the
IPT*-FP read station and in the U-P6-B5-V lower section terminal compartment.
In addition, the INTERBUS functionality can be tested by querying the status information or via
specific commands to test the device. Device error or the failure of a read/write station, for
example, can be recognized and reported by the INTERBUS master in this way.
7