Installation; Storage And Transport; Unpacking; Emc Screening - Pepperl+Fuchs IDENT-I system P IPT FP Series Manual

IPT*-FP WITH U-P6-B5-V

Installation

5 Installation
5.1

Storage and transport

For storage and transport purposes, package the unit using shockproof packaging material and
protect it against moisture. The best method of protection it to package the unit using the
original packaging. Furthermore, ensure that the ambient conditions are within permissible
range.
5.2

Unpacking

Check the product for damages while unpacking. In the event of damage to the product, inform
the post office or parcel service and notify the supplier.
Check the package contents with your purchase order and the shipping documents for:
• Delivery quantity
• Device type and version in accordance with the type plate
• Accessories
• Manual/manuals
Retain the original packaging in case the device must be stored or shipped again at a later
date.
Should you have any questions, please direct them to Pepperl+Fuchs.
5.3

EMC screening

The screening of cables provides for the discharge of electromagnetic interference. When
screening a cable, both sides of the screen must be connected to the earth with low resistance
and low inductance.
The thread of the M23 round connector is connected conductively to the lower section
housing. For correct EMC screening, cable should be used, whose screen is connected to the
nut of the plug connector.
13