Error/Status Messages - Pepperl+Fuchs IDENT-I system P IPT FP Series Manual

IPT*-FP WITH U-P6-B5-V
Operation on the INTERBUS
7.9

Error/Status messages

Status
00h
FFh
Error messages which triggered the identification system
Status
02h
03h
04h
05h
06h
07h
08h
09h
0Ah
0Bh
0Ch
0Dh
0Eh
0Fh
Error messages, which triggered the lower section U-P6-B5*
Status
10h
20h
40h
60h
70h
56
Meaning
The command has been executed without error.
The command is processing.
Meaning
Switch-on message. Reset has been executed.
Reserved
Incorrect or incomplete command or parameter not in the valid
range.
Read/write error. No data carrier in the detection range.
Hardware error,
e.g. error on self test or read head defect.
Internal device error.
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Meaning
Reserved
Reset has been executed.
Incorrect or incomplete command or parameter not in the valid
range.
Hardware error,
e.g. no communication with the identification system.
Internal device error.