Safety Instructions - Siemens SCALANCE XR-300M PoE Series Compact Operating Instructions

Simatic net. industrial ethernet switches
Table of Contents

Advertisement

Safety instructions

Read the safety notices
Note the following safety notices. These relate to the entire working life of the device.
You should also read the safety notices relating to handling in the individual sections,
particularly in the sections "Installation" and "Connecting up".
To prevent injury and damage, read the manual before using the device.
Safety notices on use in hazardous areas
General safety notices relating to protection against explosion
EXPLOSION HAZARD
Do not open the device when the supply voltage is turned on.
Safety notices when using the device according to Hazardous Locations (HazLoc)
If you use the device under HazLoc conditions you must also keep to the following safety notices
in addition to the general safety notices for protection against explosion:
This equipment is suitable for use in Class I, Division 2, Groups A, B, C and D or non-hazardous
locations only.
This equipment is suitable for use in Class I, Zone 2, Group IIC or non-hazardous locations only.
SCALANCE XR-300M PoE
Compact Operating Instructions, 03/2022, A5E02661178-15
CAUTION
WARNING
2
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scalance xr324-4m poeScalance xr324-4m poe ts

Table of Contents