Table of Contents
Advertisement
Installation and disassembly
5.5 19" rack mounting
Normal orientation of the device
•
The LED display is on the left of the front panel of the hous‐
ing.
•
The connectors for the signaling contacts and the power
supply are on the right beside the LED display.
•
The Ethernet ports or the slots for the modules are also on
the front of the housing.
•
The C-PLUG is on the right behind a protective panel se‐
cured with screws.(For more detailed information, refer to
the section on the C-PLUG in the X-300 operating instruc‐
tions.)
•
The ventilation grilles are on the top, bottom and sides of
the housing.
•
You will find the diagnostics port of the device on the back
of the housing (for more detailed information, refer to Di‐
agnostics port XR-300.)
Mounting position for devices with ports on the rear of the device
On the devices with the following MLFBs, the Ethernet ports or the slots for the modules are on
the rear of the device:
• 6GK5 324-4QG00-1HR2
• 6GK5 324-4QG00-3HR2
Normal orientation of the device
•
The LED display is on the left of the front panel of the hous‐
ing.
•
The diagnostics port of the device is also on the front of the
device.
•
The ventilation grilles are on the top, bottom and sides of
the housing.
•
The connectors for the signaling contacts and the power
supply are on the rear of the device.
•
The Ethernet ports or the slots for the modules are on the
rear of the device:
Slots for the modules are closed with dummy panels.
•
The C-PLUG is on the right behind a protective panel se‐
cured with screws.(For more detailed information, refer to
the section on the C-PLUG in the X-300 operating instruc‐
tions.)
38
Compact Operating Instructions, 03/2022, A5E02661178-15
SCALANCE XR-300M PoE
Advertisement
Table of Contents
