Summary of Contents for Flamerite Fires 400 Series
Page 1
Installation, Precautions & Servicing, including 400 manual & remote user instructions 400 Series – Verada –Atlanta Ennio/Raylia/Solace 1000/800 Blazer IMPORTANT Carefully remove the fire from the packing checking neither the heater nor the power cable has been damaged during transport. Do not operate the fire if damaged. Please bear in mind the weight of the fire before removal from the packaging and installation.
Important Safety Information and Warnings • WARNING: In order to avoid overheating, do not cover the heater. • For indoor use only. • Do not use the fire in the vicinity of a bath, shower or swimming pool. • Never use the fire to dry laundry. •...
RECYCLING Please recycle responsibly. Take your item to your local recycling centre. You can easily locate your nearest centre on the www.recyclenow.com website or check with your retailer for details on either a collection service or a store take-back scheme (some may apply charges).
Installation Instructions The minimum opening size to inset your fire. Model 400 Manual/Remote 560mm 410mm 135mm 400 app 560mm 410mm 165mm Verada 565mm 530mm 165mm Atlanta 565mm 530mm 165mm Verada & Atlanta 4 side wall mounted The height at which you may wish to fix the fire in the wall is up to you, though we recommend anywhere from 350-450mm from the floor to the bottom of the fire opening (not the bottom of the fire).
Page 5
Visit www.flameritefires.com/downloads if you require clearer downloadable images. 400 Series P a g e...
Page 7
Verada Glass Fitting & Removal WARNING: The glass used is toughened, if mishandled it is designed to shatter. Extra care should be taken during this procedure. Make sure the fire is turned off and the heater allowed to cool. Insert •...
Opening & Closing Not on 400 manual & remote fires To open and close the front glass panel, place your index finger on the handle as shown in the picture. Remove Verada, Atlanta & 400 app. • A Hold the glass panel across the top either side of the heater •...
Page 9
Operating 400 Series Manual & Remote Fires Fire controls (Manual) • The on/off switch is located at the top of the opening on the right side; this is marked with I/O and will need to be switched to I to illuminate the flame effect.
Remove and replace the lamps, fuel bed, fuel effect and glass. Please note that replacement Lamps are only covered from purchase by a 2-year warranty. Replacements are available from Flamerite Fires Ltd Cleaning The fire can be cleaned with a soft cloth and nonabrasive glass cleaner.
Type of heat output/room temperature control With distance control option Room temperature control, with open window detection Adaptive Start With electronic room temperature control plus week timer Contact details: Flamerite Fires Ltd. Greenhough Road, Lichfield. Staffs. WS137AU Model identifier(s) Item Symbol Value...
Need help?
Do you have a question about the 400 Series and is the answer not in the manual?
Questions and answers