Steps
1. Adhere the antenna to the chassis.
2. Replace the four screws (M3x4t) that secures the antennas to the chassis.
3. Route the antenna cables through the routing guides on the top bezel.
Next steps
1. Install the
front
bezel.
2. Install the
wireless
card.
3. Install the
right-side
cover.
4. Install the top-cover.
5. Install the
left-side
cover.
6. Follow the procedure in
Front I/O-panel
Removing the front I/O panel
Prerequisites
1. Follow the procedure in
2. Remove the
top
cover.
3. Remove the
left-side
cover.
4. Remove the
right-side
5. Remove the
front
bezel.
About this task
The following images indicate the location of the front I/O-panel and provides a visual representation of the removal procedure.
78
After working inside your
Before working inside your
cover.
computer.
computer.