Alienware AURORA R11 Service Manual page 101

Advanced
USB PowerShare Wake Support (S4/S5)
Auto Power On
Auto Power On Mode
Auto Power On Date
Auto Power On Time
Numlock Key
Performance Options
Overclocking Feature
Core Over Clocking Level
Computrace
Core Ratio Limit Override
Single Core
Core Voltage Mode
Core Voltage Offset
Long Duration PWR Limit
Short Duration PWR Limit Options
XMP Memory
Table 6. System setup options—Security menu
Security
Admin Password Status
System Password Status
HDD Password Status
Admin Password
System Password
HDD Password
Firmware TPM
Table 7. System setup options—Boot menu
Boot
Boot List Option
File Browser Add Boot Option
File Browser Del Boot Option
Allows you to enable front the USB devices to wake the system
from S4/S5.
Allows you to set the computer to turn on automatically every
day or on a preselected date. This option can be configured only
if the Auto Power On mode is set to Enabled Everyday or
Selected Day.
Allows you to set the date on which the computer must turn on
automatically. This option can be configured only if the Auto
Power On mode is set to Enabled 1 to 31.
Allows you to set the time at which the computer must turn on
automatically. This option can be configured only if the Auto
Power On mode is set to Enabled hh:mm:ss.
Allows you to set the status of the Num Lock key during boot to
On or Off.
Allows you enable or disable the OC level1/level2 setting and
adjust the processor flex ratio and voltage in the Customization
mode.
Allows you to enable or disable the Computrace service using the
Absolute software.
Allows you to set the core ratio limit.
Allows you to select single core or multiple cores.
Allows you to select between adaptive and override voltage
modes.
Allows you to set the override value of core voltage.
Allows you to set the turbo mode power limit.
Allows you to set the turbo mode power limit.
Allows you to set the XMP memory.
Displays whether the admin password is set.
Displays whether the system password is set.
Displays if the hard drive password is set.
Displays the admin password.
Displays the system password.
Displays the hard drive password.
Displays the firmware TPM.
Displays the available boot devices.
Allows you to set the boot path in the boot option list.
Allows you to delete the boot path in the boot option list.
101