Table of Contents
Advertisement
> Touch the icon «i»-Dialog.
> Touch the icon «Program the length with the stitch counter».
123
> Sew the desired buttonhole length.
REC
> Stop the machine.
> Push the button «Quick reverse» so that the machine sews the lower bartack and the second bead in
reverse.
> Stop the machine at the height of the first stitch.
> Push the button «Quick Reverse» so that the machine sews the upper bartack and the securing stitches.
–
The length of the buttonhole remains saved and every subsequent buttonhole is sewn identically until
the machine is switched off.
9.10 Sewing a buttonhole automatically
When the Buttonhole foot with slide No. 3A is used, the length of the buttonhole is measured automatically
by the lens on the presser foot. The buttonhole will be duplicated and the machine switches to the next step
automatically when the maximum length is reached. The Buttonhole foot with slide No. 3A is suitable for
buttonholes in the length of 4 – 31 mm, depending on the buttonhole type. The slide of the Buttonhole foot
must lie perfectly flat on the fabric so that the length can be measured accurately. All the programmed
buttonholes are the same length and of the same nice look.
Buttonholes
117
Advertisement
Table of Contents
