Risk of damage!
In environments with high humidity
condensation can build up on the ex-
ternal appliance panels. Condensate
can cause corrosion on external ap-
pliance panels.
For prevention, it is advisable to in-
stall the appliance where there is suf-
ficient ventilation in a dry and/or air
conditioned room.
After installation please make sure
that the appliance door closes prop-
erly, the specified ventilation gaps
are adhered to and that the appli-
ance is installed in accordance with
these installation instructions.
Climate range
The appliance is designed for use within
a certain climate range (ambient tem-
peratures) and should not be used out-
side this range. The climate range of the
appliance is stated on the data plate in-
side the appliance.
Climate range
SN
N
ST
T
Operating in a room which is too cold
will cause the compressor to switch off
for too long, causing the internal tem-
perature in the appliance to rise with the
risk of food deteriorating and going off.
Ambient room
temperature
+10 to +32 °C
+16 to +32 °C
+16 to +38 °C
+16 to +43 °C
Ventilation
If the ventilation gaps given are
not observed, the compressor will
run more frequently and for longer
periods.
This will result in increased energy
consumption and a higher operating
temperature for the compressor. This
may, in turn, cause damage to the
compressor.
It is essential to observe the ventila-
tion gaps given (see "Building-in di-
mensions").
Ventilation takes place through a vent-
ilation grille in the appliance plinth.
The air inlet and outlet must not be
covered or blocked in any way. They
must also be regularly cleaned of
dust.
Installation
53