Example - Fortinet FortiWiFi FortiWiFi-60B Install Manual

Configuring the modem interface
FortiWiFi-60B FortiOS 3.0 MR6 Install Guide
01-30006-0447-20080131
Keywords and variables
phone1
<phone-number>
phone2 <phone-number>
phone3 <phone-number>
pin-init <string>
priority <integer>
redial <tries_integer>
status
{disable | enable}
username1 <name_str>
username2 <name_str>
username3 <name_str>
wireless-custom-vendor-id
<hex_string>
wireless-custom-product-id
<hex_string>

Example

This example shows how to enable the modem and configure the modem to act
as a backup for the WAN1 interface. Only one dial-up account is configured. The
FortiWiFi unit and modem will attempt to dial this account 10 times. The FortiWiFi
unit will wait 5 seconds after the WAN1 interface recovers before switching back
to the WAN1 interface.
Configuring the modem using the CLI
Description
Enter the phone number required to
connect to the dialup account. Do not
add spaces to the phone number.
Make sure to include standard special
characters for pauses, country codes,
and other functions as required by your
modem to connect to your dialup
account.
Enter the phone number required to
connect to the dialup account. Do not
add spaces to the phone number.
Make sure to include standard special
characters for pauses, country codes,
and other functions as required by your
modem to connect to your dialup
account.
Enter the phone number required to
connect to the dialup account. Do not
add spaces to the phone number.
Make sure to include standard special
characters for pauses, country codes,
and other functions as required by your
modem to connect to your dialup
account.
Enter additional pin initialization strings
that may be required for a proper
connection.
Enter the priority of learned routes on
this interface.
Valid priorities are from 0 to
4294967295.
Set the maximum number of times (1-
10) that the FortiWiFi unit dials the ISP
to restore an active connection on the
modem interface. Select none to allow
the modem to redial without a limit.
Enable or disable modem support. This
is equivalent to bringing an interface up
or down.
Enter the user name used to access
the specified dialup account.
Enter the user name used to access
the specified dialup account.
Enter the user name used to access
the specified dialup account.
Enter the wireless modem vendor ID
as a hexadecimal number.
Enter the wireless modem product ID
as a hexadecimal number.
Default
No default.
No default.
No default.
No default
0
No default.
disable
No default.
No default.
No default.
No default
No default
61