Configuring The Modem Using The Cli; Syntax - Fortinet FortiWiFi FortiWiFi-60B Install Manual

Configuring the modem using the CLI

Configuring the modem using the CLI
58
Configure the modem settings using the CLI.

Syntax

config system modem
set account_relation {equal | fallback}
set altmode {enable | disable}
set auto-dial {enable | disable}
set connect-timeout <seconds>
set dial-on-demand {enable | disable}
set distance <distance>
set extra-init1 <string>
set extra-init2 <string>
set extra-init3 <string>
set holddown-timer <seconds>
set idle-timer <minutes>
set interface <name>
set mode {redudant | standalone}
set modem-dev1{internal | pcmica-wireless}
set modem-dev2{internal | pcmica-wireless}
set modem-dev3{internal | pcmica-wireless}
set passwd1 <password_str>
set passwd2 <password_str>
set passwd3 <password_str>
set peer-modem1 {actiontec | ascendTNT | generic}
set peer-modem2 {actiontec | ascendTNT | generic}
set peer-modem3 {actiontec | ascendTNT | generic}
set phone1 <phone-number>
set phone2 <phone-number>
set phone3 <phone-number>
set pin-init <string>
set priority <integer>
set redial <tries_integer>
set status {disable | enable}
set username1 <name_str>
set username2 <name_str>
set username3 <name_str>
set wireless-custom-vendor-id <hex_string>
set wireless-custom-product-id <hex_string>
end
Configuring the modem interface
FortiWiFi-60B FortiOS 3.0 MR6 Install Guide
01-30006-0447-20080131