Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ayrton Levante
Summary of Contents for Ayrton Levante
- Page 1 USER MANUAL V.1 ENGLISH VERSION 02 2019...
-
Page 3: Table Of Contents
SUMMARY Introduction Safety instructions Conditions of use Presentation and features Dimensions Description Installation instructions Installation method using truss hooks DMX512 connection Control Panel Ghibli control panel menu - Option details Master/Slave Mode settings DMX Chart Error Messages Care and maintenance Technical Specifications Warranty USER MANUAL... -
Page 4: Introduction
Anyone involved in installing, operating or servicing the LEVANTE must: At first use, your LEVANTE may give off an odor. This is a normal occurrence • Be a qualified, authorized professional that should dissipate after a few minutes of operation. -
Page 5: Presentation And Features
Do not shake the LEVANTE while installing or handling. the luminaire from the power source. Do not pull the LEVANTE by one of its cables to move it. Lift the luminaire Never dispose of the LEVANTE in a rubbish bin. Ensure that it is recycled. -
Page 6: Dimensions
DIMENSIONS Bottom view 97.5MM 107MM Front view 345.3MM 364.9MM 210.6MM Side view USER MANUAL... -
Page 7: Description
DESCRIPTION INSTALLATION INSTRUCTIONS During installation please observe the instructions according to GB7000.15 / EN60598-2-17 standards and other national standards applicable. This luminaire should be installed by a qualified technician. The fixture should be used in an environment with a temperature between -5°C and +45°C. -
Page 8: Installation Method Using Truss Hooks
DMX512 CONNECTION WITH TERMINATION PLUG For installations where the DMX cable must extend over long distances, Refer to the following diagram when installing the LEVANTE with truss or if it is located near areas with major electrical disturbance, it is hooks using omega bracket: recommended to use a DMX termination plug. - Page 9 Display can be activated without external power source if optional battery Table 1: LEVANTE MENU FUNCTIONS AND OPTIONS is installed into the unit. Battery specs are: Address Address DMX address:001-XXX: DMX address setting User Mode Stand Mode User’s mode to change...
- Page 10 LEVANTE CONTROL PANEL MENU – OPTION DETAILS w Long click to exit the menu –“Status” then back to main menu by long click again. The following section provides details on the options that can be selected Pan Reverse through the control panel menu. Refer to the table above.
- Page 11 w Double click to access to access “Pan/Tilt Spd” The display will show w Double click the jog wheel to back to last button press –“Fans “Speed 1” Turn the jog wheel to select “Speed 1” “Speed 2” “Speed 3” Control”then back to main menu by double click again.
- Page 12 jog wheel to select“ON”. Disp”. w Long click to exit menu–“Display Setting” then back to main menu by w Double click to access “DMX Value Disp” The display will show long click again. “PAN=……..”. w Double click the jog wheel to back to last button press –“Trigger” then SIGNAL SELECT back to main menu by double click again.
- Page 13 w Double click jog wheel to access main menu. w Turn the jog wheel clockwise then display“Info”. w Turn the jog wheel clockwise then display“Info”. w Double click to access “Info” turn the jog wheel to select “Software Ver”. w Double click to access “Info” turn the jog wheel to select “Time Info.”. w Double click to access “Software Ver”...
-
Page 14: Master/Slave Mode Settings
DMX controller. Set the desired number of scenes from the control panel. Then run the scenes from your controller. They will be automatically transmitted to the LEVANTE. 5. Automatic Scene Recording Use the buttons to select “Edit program.”... -
Page 15: Dmx Chart
DMX CHART DMX channel´s functions and their values (50DMX channels): THE following chart shows the functions and corresponding values for Mode/Channel Value Function each DMX channel according to mode whether Standard (St), Basic (Ba) or Extended (Ex): Color Wheel: Open / white DMX channel´s functions and their values (50DMX channels): Color 1 : CTB Mode/Channel... -
Page 16: Error Messages
ERROR MESSAGES Blade 4 A: 0-255 Open to Close When you turn on the LEVANTE, it will first perform an automatic reset. Blade 4 A Fine: The display may show “Err channel is XX” indicating there is a problem 0-255 Open to Close Fine with one or more of the channels. -
Page 17: Care And Maintenance
• Mechanical parts should show no sign of wear. • The electrical cables should show no sign of wear, cuts or splices. CARE AND MAINTENANCE The care and maintenance of your LEVANTE should be ensured by TECHNICAL SPECIFICATIONS a qualified technician. Your LEVANTE requires regular servicing. The frequency depends essentially on its operating conditions and environment. -
Page 18: Warranty
• Protective foam: 430 mm x 660 mm x 280 mm (L x H x D) installation of this product, which is the responsibility of the installer. WEIGHT Broken glass lenses on the LEVANTE, and any damage that could arise • Product: 22.2 kg thereof, are excluded from the warranty. Any possible cosmetic defects,... - Page 19 USER MANUAL _ 19...
- Page 20 www.ayrton.eu...
Need help?
Do you have a question about the Levante and is the answer not in the manual?
Questions and answers