Advertisement

USER MANUAL V.1
ENGLISH VERSION
09 18 2015

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NandoBeam S3 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Ayrton NandoBeam S3

  • Page 1 USER MANUAL V.1 ENGLISH VERSION 09 18 2015...
  • Page 3: Table Of Contents

    SUMMARY Introduction Safety instructions Conditions of use Presentation and features Dimensions Description Installation instructions Installation method using truss hooks DMX512 connection Control Panel NandoBeam-S3 control panel menu - Option details Master/Slave Mode settings Led mapping DMX Chart Error Messages Care and maintenance Technical Specifications Warranty USER MANUAL...
  • Page 4: Introduction

    NANDOBEAM-S3, requiring repair. you keep a copy for future use. All the information found in this manual is subject to change without notice. AYRTON reserves the right to modify and upgrade its range of products, with no obligation to integrate these Be careful to power off your NANDOBEAM-S3 by removing the power plug changes into products already sold.
  • Page 5: Presentation And Features

    To adjust the settings on the NANDOBEAM-S3 (i.e., DMX address, DMX cause breakage of the plastic parts or the body. AYRTON cannot be held operating mode and other options), a Remote Device Management responsible for the luminaire’s broken plastic parts or body, which are not...
  • Page 6: Dimensions

    DESCRIPTION There are a multitude of RDM DMX controllers on the market from different manufacturers (excluding AYRTON). It is worth noting that an RDM DMX controller is not required to change the settings on the NANDOBEAM-S3. A light console or any standard DMX-type controller is sufficient.
  • Page 7: Installation Method Using Truss Hooks

    a safety cable of the appropriate size. Attach the clamp to the omega bracket using an M12 screw. Do not stand under the luminaire while it is being installed, dismantled Insert the quick-lock fasteners of the omega bracket into the respective or serviced.
  • Page 8: Control Panel

    THE NANDOBEAM-S3 DMX ADDRESS SETTING TABLE 1: NANDOBEAM-S3 MENU FUNCTIONS AND OPTIONS All luminaires have a DMX start address correctly set when using a DMX Address Set Dmx Addr A001~AXXX DMX address setting signal to control them. The DMX start address is the channel from which User Mode Stand Mode User’s mode to change...
  • Page 9 ADDRESS w Access the menu by pressing the “Mode Esc” key. w Use the up/down arrow keys to reach the “OPTION” menu and press “Enter.” Then use the left/right arrow keys to select “Status.” Finally, use Allows you to change a DMX address from the fixture’s control panel. the left/right arrow keys to select “Pan Degree.”...
  • Page 10 SET TYPE w Access the menu by pressing the “Mode Esc” key. Allows you to change the model of LED card used in the fixture. The last w Use the up/down arrow keys to reach the “OPTION” menu and press part of serial number indicates the LED card binning (2 binnings).
  • Page 11 Shows the number of hours the fixture has been operating since it was w Press “Enter” once again to display the software version. powered on. w Access the menu by pressing the “Mode Esc” key. TEST w Use the up/down arrow keys to reach the “INFO” menu and press “Enter.”...
  • Page 12: Master/Slave Mode Settings

    MASTER/SLAVE MODE SETTINGS Press ENTER to confirm. Press MODE/ESC to return to the main menu. Example: A MASTER fixture can send up to 3 different sets of data to a SLAVE ”Program 2” includes scenes: 10, 11, 12, 13. fixture (e.g., a MASTER fixture can control 3 different SLAVE fixtures which ”Program 4”...
  • Page 13: Dmx Chart

    DMX CHART DMX channel’s funtions and their values (28 DMX channels) Mode/Channel Value Function DMX channel’s funtions and their values (28 DMX channels) Dimmer intensity: Mode/Channel Value Function 0-255 Intensity 0 to 100% Color Macro: Pan Movement 8bit : No function 0-255 Pan Movement 8-39...
  • Page 14: Error Messages

    100-119 Internal program 1 (scene 1~8 of EEPROM) Ayrton is continually upgrading this product line. It is therefore possible 120-139 Internal program 2 (scene 9~16 of EEPROM) that a new software version is available that will increase the unit’s...
  • Page 15: Technical Specifications

    flight case that can be custom built for the luminaire. Compatible with the DMX/RDM (Remote Device Management) protocol Pre-programmed macro modes AYRTON does not offer custom flight cases for the NANDOBEAM-S3. This Information menu including: timer, temperature, software version, etc. accessory is to be provided by the user.
  • Page 16: Warranty

    In addition, cosmetic defects caused by the normal wear and tear of the unit are not covered under the warranty. Any modification to the fixture will void the warranty. AYRTON cannot under any circumstances be held liable for quality and conformity regarding the installation of this product, which is the responsibility of the installer.
  • Page 17 USER MANUAL _ 17...
  • Page 18 www.ayrton.eu...

Table of Contents