Next steps
1. Connect the
battery
cable to the connector on the system board.
2. Replace the
base cover
3. Replace the
SD memory card
4. Follow the procedure in
Hard drive
Removing the hard drive assembly
Prerequisites
1. Follow the procedure in
2. Remove the
SD memory card
3. Remove the
base cover
4. Remove the
battery
Steps
1. Lift the latch and disconnect the hard drive cable from the system board [1].
2. Remove the four (M2x3) screws that secure the hard drive assembly to the palm rest and keyboard assembly [2].
3. Lift the hard drive assembly along with its cable off the palm rest and keyboard assembly [3].
after working inside your computer
before working inside your computer
Removing and installing components
31