5. Replace the
WLAN
6. Replace the
memory
7. Replace the
battery
8. Replace the
base cover
9. Replace the
SD memory card
10. Follow the procedure in
Power-adapter port
Removing the power adapter port
Prerequisites
1. Follow the procedure in
2. Remove the
SD memory card
3. Remove the
base cover
4. Remove the
battery
5. Remove the
WLAN
6. Remove the
SSD
7. Remove the
display assembly
8. Remove the
power button board
Steps
1. Disconnect and route the power adapter cable from the system board [1, 2].
2. Remove the single (M2x3) screw that secures the power adapter port to the palmrest and keyboard assembly [3].
3. Lift the power adapter port, along with its cable, off the palmrest and keyboard assembly [4].
64
Removing and installing components
after working inside your computer
before working inside your computer