Next steps
1. Replace the
power button board
2. Replace the
display assembly
3. Remove the
system fan
4. Replace the
WLAN
5. Connect the battery cable to the connector on the system board.
6. Replace the
base cover
7. Replace the
SD memory card
8. Follow the procedure in
Power button
Removing the power button
Prerequisites
1. Follow the procedure in
2. Remove the
SD memory card
3. Remove the
base cover
4. Disconnect the battery cable from the connector on the system board.
5. Remove the
WLAN
6. Remove the
system fan
7. Remove the
heatsink
8. Remove the
display assembly
9. Remove the
power button board
Steps
1. Remove the single (M2x2) screw that secures the power button on the palmrest and keyboard assembly [1].
2. Lift the power button off the palmrest and keyboard assembly [2].
after working inside your computer
before working inside your computer
Removing and installing components
57