Advertisement
User Manual of DMR‐5R Digital Two‐way Radio
15
BCL
16
AUTOLK
17
SFT-D
18
OFFSET
19
MEMCH
20
DELCH
21
WT-LED
22
RX-LED
23
TX-LED
24
BAND
26
PONMGS
27
ROGER
28
RESET
29
MODE
OFF
Busy
channel
lockout
ON
Automatic keyboard
OFF
lock
ON
OFF
Frequency
+
difference direction
-
Frequency
00.000,...,69.990
difference
Channel storage
000,...,127
Channel deletion
000,...,127
OFF
Standby
backlight
BLUE
selection
ORANGE
PURPLE
OFF
Receiving backlight
BLUE
selection
ORANGE
PURPLE
OFF
BLUE
Transmitting
ORANGE
backlight selection
PURPLE
VHF
Frequency
band
selection
UHF
FULL
Startup display
MGS
Call
end
prompt
ON
tone
OFF
VFO
Initialization
ALL
Operation mode
FM
displayed by way of channel name
(Specific name is set in frequency writing
software)
Allow transmitting even if the channel is
occupied.
Prohibit transmitting if the channel is
occupied.
Deactivate automatic keyboard lock
Activate automatic keyboard lock function
In frequency mode, there isn't difference
between
transmitting
frequency
receiving frequency.
In
frequency
mode,
the transmitting
frequency is the receiving frequency plus
the frequency difference.
In
frequency
mode,
the transmitting
frequency is the receiving frequency minus
the frequency difference.
Difference between transmitting frequency
and receiving frequency in frequency mode
(controlled
by
frequency
difference
direction)
For channel storage, it is used to indicate
the number of the channel to be stored. If
CH-character is displayed in front of the
numbers, the channel has previously stored
channel parameters.
Delete the channel parameters of specified
channel. If there isn't CH-character in front
of the numbers, the channel doesn't have
parameters, and the operation is invalid.
Turn off the backlight
In standby mode, turn on the blue light.
In standby mode, turn on the orange light.
In standby mode, turn on the purple light.
Turn off the backlight
In receiving mode, turn on the blue light.
In receiving mode, turn on the orange light.
In receiving mode, turn on the purple light.
Turn off the backlight
In transmitting mode, turn on the blue light.
In transmitting mode, turn on the orange
light.
In transmitting mode, turn on the purple
light.
Set the working frequency band as
136~174MHz
Set the working frequency band as
400~480MHz
Full-screen character display
Type and model display
Activate call end prompt tone
Deactivate call end prompt tone
Menu initialization
Menu and channel initialization
Inquire the operation mode in channel
mode and modify the operation mode in
and
Advertisement
