Advertisement
User Manual of DMR‐5R Digital Two‐way Radio
27
TX-LED
28
BAND
30
STE
31
RP-STE
32
PRT-RL
33
PONMGS
34
ROGER
35
RESET
36
MODE
37
CP Ver.
DMR digital menus shall be accessed and operated in digital channel, as detailed below:
Menu
Display
selection
BLUE
ORANGE
PURPLE
OFF
Transmitting
BLUE
backlight selection
ORANGE
PURPLE
VHF
Frequency
band
selection
UHF
OFF
Tail
tone
elimination
ON
OFF
Across-relay
tail
tone elimination
1,2,...,10
OFF
Delay time of relay
tail tone
1,2,...,10
FULL
Startup display
MGS
Call
end
prompt
ON
tone
OFF
VFO
Initialization
ALL
FM
Operation mode
DMR
Software version
XXXXXX
Function description
Display
In receiving mode, turn on the blue light.
In receiving mode, turn on the orange light.
In receiving mode, turn on the purple light.
Turn off the backlight
In transmitting mode, turn on the blue light.
In transmitting mode, turn on the orange light.
In transmitting mode, turn on the purple light.
Set
the
working
136~174MHz
Set
the
working
400~520MHz
The two-way radio doesn't send out shutdown
code after PTT key is released. Let it appear
when the signaling is retransmitted by the relay
station so as to confirm that the signal
transmitted by this two-way radio is received
and retransmitted.
The two-way radio sends out shutdown code
after
PTT
instantaneous noise appeared at the receiver.
When transmitting across the relay and
retransmitting, after the transmitter releases the
PTT key, the two-way radio enters receiving
state. Due to the delay of relay, the instant
signal transmitted by the relay can be received。
The value of the menu item shall be adjusted to
ensure that no noise of this two-way radio is
generated when transmitting across the relay, so
as to confirm whether the relay is operating.
The menu item shall be set OFF, which is
available only in analog mode (unavailable for
digital mode).
When the signal is transmitted across the relay
station and retransmitted by it, in order to
confirm
whether
retransmitted the signal for this two-way radio,
the delay time of the relay station stopping
transmitting shall be utilized to confirm that the
signal has been retransmitted. The menu item is
used to adjust the time of the noise. If the noise
isn't needed, please set it as OFF, which is
available only in analog mode (unavailable for
digital mode).
Full-screen character display
Type and model display
Activate call end prompt tone
Deactivate call end prompt tone
Menu initialization
Menu and channel initialization
Inquire the operation mode in channel mode and
modify the operation mode in VFO mode
Inquire the operation mode in channel mode and
modify the operation mode in VFO mode
Inquire software version number (date)
character
of
Instructions for setting of secondary menu
frequency
band
as
frequency
band
as
key
is
released
to
inhibit
the
relay
station
has
Advertisement
