Table of Contents
Advertisement
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the
Orientation
The EZ Link Strip Q6 BT may be mounted in any position; however, make sure adequate ventilation is
provided around the product.
Rigging
•
Before deciding on a location, always make sure there is easy access to the product for
maintenance and programming.
•
Make sure adequate ventilation is provided around the product.
•
Make sure that the structure or surface onto which you are mounting the product can support the
product's weight. (see the
•
When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, whether an elevated platform or a truss.
•
When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
•
When power linking multiple products, mount the products close enough for power linking cables to
reach.
Mounting Diagram
Mounting Clamp
(such as CLP-15 from Chauvet)
Hanging Bracket
(x2)
When using only one mounting clamp with this fixture, you must use a clamp with a
captive bolt to prevent accidental loosening.
Page 6 of 16
Technical
Specifications)
Safety Cable
(such as CH-05
from Chauvet)
EZ Link Strip Q6 BT User Manual Rev. 1
Setup
Safety
Notes.
Bracket
Adjustment
Knob (x2)
Advertisement
Table of Contents
