Additional 2-Way Lcd Remote Functions - Prestige APS596Z Owner's Manual

Additional 2-Way LCD Remote Functions

Additional Features of the Optional 2 Way LCD Remote Control
Display Illumination
Press and hold the
for five (5) seconds.
Melody / Vibration Mode
To have the remote control vibrate or play a melody tone each time it
receives a response from the vehicle press and hold
release .
Battery Save Mode
While in POWER SAVE MODE the 2-Way LCD transmitter will NOT look
for any incoming signals from the main unit until a button is pressed. The
LCD screen will display
power save mode press and hold
Stopping LCD Trigger Melody
To stop the alarm trigger melody if the system has been triggered WITHOUT
disarming the system, press
command to the vehicle at this time and the alarm will silence.
Parking Meter Countdown
The parking meter countdown timer has 6 preset times, to access the preset
times and begin countdown press and hold the
OPT
release
time.
2 Car Mode
To control a second security system enter 2 car mode by pressing
and together for five (5) seconds. When the
transmitter's LCD screen it will control the second security system. Use the
same method to exit 2 car mode and resume control of the original vehicle's
security system.
NOTE: A second security system must be installed and the LCD transmitter
must be learned to it before this feature will operate the additional system.
2020 Voxx Electronics Corporation. All rights reserved.
F
button for one (1) second. The display will illuminate
to indicate that power save mode is ON. To enter
, each additional press of
F
then press .
button one time only, this will send a lock
OPT
will increase the countdown
F
then press and
F
button then press and
icon appears on the
&
7