Manually Overriding The Security System; Custom Code Override; Custom Code Programming - Prestige APS596Z Owner's Manual

Security / keyles entry system
Hide thumbs Also See for APS596Z:
Table of Contents

Advertisement

Custom Code Valet Override (Optional)
Unlike the default Valet Override, Custom Code Override is a user
personalized code that offers a higher lever of security. If the user chooses to
use Custom Code Override, Feature Bank 2 ; Feature 9 must be programmed
for "Custom Code". Once the option has been selected the code must be
programmed. Once the Custom Code is programmed it cannot be changed
without first disarming the alarm.
Custom Code Override Procedure
The Custom Code is made up of 2 numbers. Each chosen number must be
between digits 1-9. The default Custom Code is "11". To disarm the alarm
using the Custom Code option:
1.
Turn the vehicle ignition to ON.
2.
Within five (5) seconds, Press the valet button one (1) time.
3.
Within five (5) seconds, Turn the ignition OFF/ON.
4.
Within five (5) seconds, Press the valet button one (1) time.
5.
Turn the vehicle ignition to OFF then ON to start the vehicle.
Custom Code Programming Procedure
In this example, the user has selected Custom Code "23". To program a user
selected custom code:
Start with the alarm disarmed.
1.
Turn the ignition to the ON position.
2.
Within ten (10) seconds, press the valet button three (3) times to
enter programming.
3.
Within ten (10) seconds, Cycle the ignition OFF/ON, OFF/ON, OFF/
ON. The system will beep one (1) time.
4.
Within ten (10) seconds, Press the valet button two (2) times. This
number will indicate the first digit of the chosen Custom Code.
5.
Within ten (10) seconds, Cycle the ignition OFF/ON.
6.
Within ten (10) seconds, Press the valet button three (3) times. This
number will indicate the second digit of the chosen Custom Code.
7.
Cycle the ignition OFF.
If the Custom Code was accepted the LED will flash the first number (2),
pause, then the second number (3). This will repeat two (2) more times to
confirm the Custom Code entry. If after fifteen (15) seconds the LED does not
flash please repeat steps 1-7.
2020 Voxx Electronics Corporation. All rights reserved.
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Prestige aps596z

Table of Contents