Using Your Remote Control Arming the Security System To arm the system, exit the vehicle, close all doors, then press the button. The parking lights will flash one (1) time, indicating the system is armed, has locked the doors (if equipped and connected) and activated the starter disable feature.
To enter or exit valet mode simply follow the steps outlined below: Turn the vehicle’s ignition ON. Push and hold the valet button. The LED will turn on solid when valet mode is active. Release the valet button. APS596Z Owners REV.B...
Custom Code Valet Override (Optional) Unlike the default Valet Override, Custom Code Override is a user personalized code that offers a higher lever of security. If the user chooses to use Custom Code Override, Feature Bank 2 ; Feature 9 must be programmed for “Custom Code”.
3 Flashes / Disarmed Zone 3 Trigger, Door Siren/Horn Chirp Indications Chirps Function Disarm Door Ajar Upon Arming Disarm / Triggered Parking Light Flash Indications Flashes Function Disarm Disarm / Triggered ON (Solid or Slow Flash) Remote Started APS596Z Owners REV.B...
Additional 2-Way LCD Remote Functions Additional Features of the Optional 2 Way LCD Remote Control Display Illumination Press and hold the button for one (1) second. The display will illuminate for five (5) seconds. Melody / Vibration Mode To have the remote control vibrate or play a melody tone each time it receives a response from the vehicle press and hold then press and release .
Page 8
1 / 2 Car Mode Valet Mode Shock Sensor OFF Shock Sensor Remote Page Vibrate Mode Transmitting Out Of Range Battery Indicator Power Save Mode Timer Start Temp Start Count Down Timer Alarm Clock Time Display Temp Display APS596Z Owners REV.B...
NOTE: This system has one (1) button programming which programs all channels of the system. NOTE: The system will hold up to four (4) transmitters in memory, programming a 5th transmitter will erase the oldest transmitter in memory. APS596Z Owners REV.B...
LIMITED LIFETIME WARRANTY Voxx Electronics Corporation (the Company) warrants to the original purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within the Lifetime from the date of original purchase in the original vehicle, such defect(s) will be repaired or replaced with new or reconditioned product, (at the Company’s option) without charge for parts or repair labor.
Page 12
This device must accept any interference received, including any interference that may cause undesired operation. Warning! Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. PATENTED: www.voxxintl.com/company/patents APS596Z Owners REV.B...
Need help?
Do you have a question about the APS596Z and is the answer not in the manual?
Questions and answers