Starting The Setup Wizard - Fortinet FortiGate FortiGate-5001FA2 Installation Manual

NAT/Route mode installation
24
Table 3: Setup wizard settings
DHCP server
Internal servers
Antivirus

Starting the setup wizard

1 In the web-based manager, select Easy Setup Wizard.
Figure 6: Select the Easy Setup Wizard
2 Follow the instructions on the wizard pages and use the information that you gathered
in Table 1 on page 18
3 Select the Next button to step through the wizard pages.
Starting IP:
Ending IP:
Netmask:
Default
Gateway:
DNS IP:
Your FortiGate firewall contains a DHCP server to automatically set up
the addresses of computers on your internal network
Web Server:
SMTP Server:
POP3 Server:
IMAP Server:
FTP Server:
If you provide access from the Internet to a web server, SMTP server,
POP3 server IMAP server, or FTP server installed on an internal
network, add the IP addresses of the servers here.
High Create a protection profile that enables virus
scanning, file blocking, and blocking of oversize
email for HTTP, FTP, IMAP, POP3, and SMTP. Add
this protection profile to a default firewall policy.
Medium Create a protection profile that enables virus
scanning, for HTTP, FTP, IMAP, POP3, and SMTP
(recommended). Add this protection profile to a
default firewall policy.
None Do not configure antivirus protection.
Select one of these security levels to protect your network from viruses.
and Table 3 on page 23
01-28011-0259-20060210
Configuring the FortiGate for the Network
_____._____._____._____
_____._____._____._____
_____._____._____._____
_____._____._____._____
_____._____._____._____
_____._____._____._____
_____._____._____._____
_____._____._____._____
_____._____._____._____
_____._____._____._____
to fill in the wizard fields.
Fortinet Inc.