elero RolTop S Operating And Installation Manual

Roller shutter drive RolTop
120 V / 60 Hz

Table of contents

Operating and installation
1
instructions
2 General information
2.1 Standards and guidelines
2.2 Intended use
2.3 Foreseeable misuse
2.4 Warranty and liability
2.5 Customer service of the manufacturer
3 Safety
3.1 General safety instructions
3.2 Layout of safety instructions
3.3 General safety principles
3.4 General obligations of the operator
3.5 General requirements on personnel
3.6 Safety instructions on technical condition
3.7 Safety instructions on transport,
assembly and installation
3.8 Safety instructions on operation
3.9 Safety instructions on electrical installation
4 Product description
5 Installation
5.1 Mechanical mounting
5.2 Electrical connection
5.3 Connection example, RolTop 120 V / 60 Hz
5.4 Parallel connection
5.5 Commissioning
5.6 End position and relief settings
5.6.1 Relief function for end position(s)
5.6.2 Relief function at the upper stop
5.6.3 Relief function at the lower stop
5.6.4 Changing / deleting of end positions
and deleting the relief function
5.6.5 Four options for end position settings
5.6.6 Option A: Upper and lower end position
freely confi gurable
5.6.7 Option B: Fixed upper end position,
lower end position freely confi gurable
5.6.8 Option C:
Fixed upper and lower end position
5.6.9 Option D:
Upper end position freely confi gurable,
fi xed lower end position
5.7 Technical data
6 Troubleshooting
1
7 Servicing
8 Cleaning
1
9 Repair
1
10 Address
2
11 Disassembly and disposal
2
12 EC Declaration of Conformity
2
13 EN: Addendum to the manual
2
UL approval
2
14 FR: Addendum au manuel
2 Homologation UL
2
3
3
Roller shutter drive RolTop
3
120 V / 60 Hz
3
1 Operating and installation
4 instructions
4
Please keep these operating instructions for later use and
have them available during the complete service life of the
4
product!
4
The German version of these operating instructions is
the original version.
4
All foreign language documents are translations of the
5
original version.
5
All rights reserved with regard to patent claim or submission
of design or utility patent.
6
2

General information

6
The structure of these operating instructions is based on
6
the service life phases of the electrical drive (subsequently
referred to as product).
6
The manufacturer reserves the right to make changes to the
6
technical data included in these operating instructions. The-
se may deviate from the respective model of the product
6
while the factual information are generally not changed and
are not losing their validity. The current state-of-the-art can
6
be obtained from the manufacturer at all times. Potential
claims cannot be asserted. Deviations from text and pictori-
6
al statements are not possible and depending on the tech-
nical development, setup and accessories of the product.
6
Deviating information on special models are included by the
manufacturer in the sales documentation. Other information
shall remain unaffected by this.
7
2.1

Standards and guidelines

During system design, basic safety and health requirements
7
of applicable laws, standards and guidelines were obser-
ved. The safety is confi rmed by means of the Declaration
7 of Conformity (refer to „EC Declaration of Conformity"). All
safety information in these operating instructions are based
on currently applicable laws and regulations in Germany.
All information in the operating instructions must be obser-
8
8
8
8
8
8
8
8
9
9
9
138186501_US+CA_0513