RolMotion/D+ M Roller Shutter Drive
Contents
Operating and assembly
1
instructions
2
General information on these instructions
2.1
2.2
Intended use
2.3
2.4
2.5
3
3.1
3.2
4
4.1
4.2
5
5.1
5.2
5.3
5.4
5.5
6
6.1
6.2
7
8
9
10
11
12
13
13.1
RolMotion/D+ M Roller Shutter Drive
1
Operating and assembly instructions
1
Follow these instructions for safe and proper use. Observe
1
all assembly instructions. Incorrect assembly can lead to
serious injuries. Please keep this operating manual for fu-
1
ture reference to ensure that it can be accessed throughout
the entire service life of the product!
1
The German operating manual is the original version.
2
All documents in other languages are translations of the
original version.
2
All rights reserved in the case of patent, utility model or
design registrations.
2
General information on these instructions
2
2
The content structure is based on the life cycles of the elec-
tric motor drive (hereinafter referred to as "the product").
2
The manufacturer reserves the right to make changes to
the technical data in these operating instructions. In some
3
cases, this technical data may differ from those of the
respective product version; however, the functional informa-
3
tion will not undergo significant changes or become invalid.
3
The current version of the technical specifications may be
requested from the manufacturer at any time. No claims
3
may be asserted against the manufacturer as a result of this
provision. Deviations from textual or visual statements may
4
occur depending on the product's technical development,
features and accessories. Deviating information for special
4
versions will be provided by the manufacturer in the sales
documentation. Other information shall remain unaffected
by these provisions.
5
2.1
Standards and guidelines
5
During construction, the fundamental health and safety
requirements were applied and provision was made for the
5
appropriate legislation, standards, directives and guidelines.
The safety of the product is confirmed by the declaration
5
of conformity (see EC Declaration of Conformity). All in-
formation relating to safety in these operating instructions
5
refers to the laws and regulations that are currently valid
in Germany. All information in these operating instructions
5
must be complied with at all times and without limitation. In
addition to the safety notes in these operating instructions,
5
the regulations on accident prevention, environmental pro-
tection and occupational health and safety applicable at the
5
location of use must be observed and adhered to.
The regulations and standards for safety assessment
6
can be found in the EC Declaration of Conformity.
6
2.2
Intended use
The product is intended for use in facade constructions as
6
a drive for electrically powered roller shutters and blinds.
6
The elero calculation program
6
is vital for defining the drive
6
Other applications must be agreed upon in advance
with the manufacturer, elero GmbH Antriebstechnik
(see "Address").
The plant operator shall be solely responsible for any dam-
7
ages arising from the improper use of this product. The
manufacturer cannot be held liable for personal or material
8
damages caused by misuse or procedural errors, nor by
improper operation or commissioning.
138251201_EN_1020