Table of Contents
Advertisement
Quick Links
RolTop-868 Roller Shutter Drive
Table Of Contents
1
2
2.1
2.2
2.3
2.4
2.5
3
3.1
3.2
4
5
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
6
1
7
1
8
Repair
2
9
10
2
2
11
2
12
2
12.1
2
12.2
2
12.3
2
12.4
3
3
4
4
5
5
5
5
RolTop-868 Roller Shutter Drive
5
1
Operating and installation instructions
5
Please keep these operating instructions for later use, to be
5
available throughout the life of the product!
The German manual is the original version.
5
All other documents represent the language translations of
the original text.
All rights in the case of a patent, utility model or ornamental
5
design registration are reserved.
2
General for instructions
6
The content structure is based on the life cycles of the elec-
6
tric motor drive (hereinafter referred to as "Product").
The manufacturer reserves the right to make changes to
6
the Specifications stated in these Operating Instructions
at any time. These may, in individual cases, be different
from the respective product version, however the functional
6
information will not undergo significant changes or become
invalid. The current version of the Specifications may be
6
requested from the manufacturer at any time. No claims
may be asserted against the manufacturer as a result of the
preceding sentence. Deviations from text or picture state-
7
ments are possible and depend on the technical develop-
ment, features, and accessories of the products. Deviating
7
information on special versions will be explained by the
manufacturer in the sales documentation. Other information
7
shall remain unaffected by these provisions.
7
7
8
8
8
8
8
8
9
10
11
11
138134006_EN_0319
Advertisement
Table of Contents
Related Manuals for elero RolTop-868
Summary of Contents for elero RolTop-868
-
Page 1: Table Of Contents
12.4 RevoLine L-868 Product description Assembly Mechanical fastening Electrical connection Connection example, RolTop-868 230 V/50 Hz 4 Parallel connection Commissioning 5.5.1 Connection for cable assembly 5.5.2 Connection for radio (transmission operation) RolTop-868 Roller Shutter Drive Setting the end positions and the relief Operating and installation instructions 5.6.1 Relief function for the end position(s) -
Page 2: Standards And Directives
The address for sending to customer drive electrically powered and regular roller shutters. service, see the chapter "Address". The determining factor for the drive is the elero drive com- If you have not purchased the product directly from elero, putation program please contact the supplier of the product. -
Page 3: Product Description
RolTop-868 from the active in radio mode. original packaging. • The variant-dependent values of your RolTop-868 can be ►The drive may only be installed so that it is not irrigated. removed from the type label. -
Page 4: Mechanical Fastening
Depending upon used mounting plate and/or adapter plate to crushing or tensile load. it is necessary in particular with the RolTop-868 Type S to ►Note the bending radius of the cables (at least 50 mm). remove this screwed plate before a cable exchange. -
Page 5: Parallel Connection
Teaching in a transmitter onto a drive is described in chapter 5.7. Important preliminary consideration: Fig. 5 Circuit diagram RolTop-868 230 V / 50 Hz and Decide on a specific relief function before setting the end wiring at use with Hirschmann plug STAS 3 (with... -
Page 6: Programme Or Delete Further Curtain Positions
Optional: Activation of the relief function for the ④ Press the AUF button until the drive stops ▲ lower stop; see chapter 5.6.3 automatically. Setting of the end positions variant C is now complete. The lower end position has been set. 6 | EN © elero GmbH... -
Page 7: Variant D: Upper End Position Freely Adjustable, Fixed Lower Limit Stop
The (first) transmitter has been through the teach-in in one direction error tion procedure. • Drive not • No mains • Check mains responding voltage voltage • Temperature • Allow drive to limiter has cool tripped © elero GmbH EN | 7... -
Page 8: Repair
Maybachstr. 30 Fax: +49 7021 9539-212 73278 Schlierbach info@elero.de elero GmbH hereby declares that the tubular drive Rol- Deutschland / Germany www.elero.com Top-868 complies with the basic prerequisites and the other Please visit our website if you require a contact outside relevant provisions of the EC directives. -
Page 9: Revoline S-868
■ ■ ■ ■ ■ VDE seal of approval ■ ■ ■ ■ ■ ■ ■ ■ EMV proof Item Number (round head / 302220006 302120006 302320006 302340006 302540006 308240006 308140006 30816006 star head) © elero GmbH EN | 9... -
Page 10: Revoline M-868
14 | 12 | 19 14 | 12 | 19 14 | 12 | 19 14 | 12 | 19 14 | 12 | 19 (elero, round head, starhead) Weight [kg] Operating environment -20 ... 60 -20 ... 60 -20 ... 60 -20 ... -
Page 11: Revoline M-868
≤ 500 | ≤ 10 Transmission power [mW] | [dBm] Operation duration (min S2) Length C (mm) Lenght D (mm) Length E (mm) elero head Weight (kg) Operation environment temperature (°C) – 2 0 bis +60 – 2 0 bis +60 – ... -
Page 12: Revoline L-868
Emission sound pressure level < 70 (dBA) Protection class I • Plug-in connecting cable (m) Item number 36 732.0006 36 732.0076 36 742.0006 36 742.0076 elero GmbH Maybachstr. 30 info@elero.de We reserve the right to make technical changes Antriebstechnik 73278 Schlierbach www.elero.com...