Island Installation - EcoSmart Fire FLEX Series Clearances And Installation Manual

ENGLISH
Island
Installation
Equipment required: Power Drill, Screwdriver, Level, Hand Trowel for
Plaster, Silicone Gun, Caulk Gun
1. Construct the framework with the opening size shown in Table F. The
base of the frame can be a solid bench/platform, which will assist in
leveling up the appliance when in position.
WARNING: This four-sided appliance cannot be inserted into a wall
structure. It must be installed on a separate framework securely
anchored to the floor. Do not install on moveable or weak structure.
The top part of the appliance should be installed on framework secured
to the ceiling and aligned with the bottom frame. Four-sided appliances
are designed as wall divider inserts. If you do not comply with this
installation instruction, the structure could overheat and catch fire.
Table F: Framework Opening Sizes
Physical appliance dimensions should be verified against cut out dimensions BEFORE
installation begins to confirm tolerances align.
W
APPLIANCE
mm [in]
FLEX18IL
455 [17.9]
FLEX32IL
887 [34.9]
FLEX42IL
1142 [45]
FLEX50IL
1347 [53]
FLEX50IL.BX
1347 [53]
FLEX60IL.BX
1602 [63.1]
FLEX68IL
1807 [71.1]
FLEX68IL.BX
1807 [71.1]
FLEX68IL.BX2
1807 [71.1]
FLEX78IL.BX2
2062 [81.2]
FLEX86IL
2267 [89.3]
FLEX86IL.BX
2267 [89.3]
FLEX86IL.BX2
2267 [89.3]
FLEX104IL
2727 [107.4]
FLEX104IL.BX
2727 [107.4]
FLEX104IL.BX2
2727 [107.4]
FLEX122IL
3187 [125.5]
FLEX122IL.BX
3187 [125.5]
FLEX122IL.BX2
3187 [125.5]
FLEX140IL.BX
3647 [143.6]
FLEX140IL.BX2 3647 [143.6]
FLEX158IL
4107 [161.7]
FLEX158IL.BX2 4107 [161.7]
* Appliance weight includes burner/s (dry weight excluding fuel), glass charcoal and glass. It
does NOT include glass charcoal for side boxes.
IMPORTANT: The framing above the appliance must be self-
supporting. The appliance is not load-bearing.
www.ecosmartfire.com
D H Weight*
mm [in] mm [in] kg [lbs]
349 [13.6] 730 [28.7] 22.2 [48.9]
33.5 [73.7]
349 [13.6] 730 [28.7]
349 [13.6] 730 [28.7] 49.8 [109.6]
59.9 [131.8]
349 [13.6] 730 [28.7]
349 [13.6] 730 [28.7] 48.3 [106.3]
64.6 [142.2]
349 [13.6] 730 [28.7]
349 [13.6] 730 [28.7] 75.2 [165.5]
74.7 [164.4]
349 [13.6] 730 [28.7]
349 [13.6] 730 [28.7] 63.1 [138.9]
79.4 [174.8]
349 [13.6] 730 [28.7]
349 [13.6] 730 [28.7] 101.5 [223.2]
90 [198.1]
349 [13.6] 730 [28.7]
349 [13.6] 730 [28.7] 89.5 [197]
116.3 [255.9]
349 [13.6] 730 [28.7]
349 [13.6] 730 [28.7] 116.3 [255.9]
104.8 [230.6]
349 [13.6] 730 [28.7]
349 [13.6] 730 [28.7] 148.6 [327]
131.1 [288.4]
349 [13.6] 730 [28.7]
349 [13.6] 730 [28.7] 131.1 [288.4]
163.4 [359.6]
349 [13.6] 730 [28.7]
349 [13.6] 730 [28.7] 145.9 [321.1]
173.9 [382.6]
349 [13.6] 730 [28.7]
349 [13.6] 730 [28.7] 178.3 [392.2]
2. Remove the extension flange from the firebox so that both sides are
the same height. This will help make sliding the firebox into the frame
easier. Pay attention not to lose the screws, they will be needed again
when the flange is re-installed.
3. Slide the appliance inside the framing cavity (the bottom tray can sit
directly on top of the frame). The appliance is shipped with red stability
bracket(s) installed on the open side(s) to keep the appliance square while
in transport and during installation. Keep the bracket(s) on while framing
up the setting to assist in minimising movement of the appliance.
4. Align the flange extension panel with the threaded holes on the
appliance. Screw it into place using the included screws (bottom row
onto appliance, top row onto framing material) to secure it into position.
5. Fix the appliance to the framework with screws using the existing
mounting holes on the appliance flanges. Make sure that the
appliance is level before securing it in place.
FRONT VIEW
BACK VIEW