Bay Installation - EcoSmart Fire FLEX Series Clearances And Installation Manual

ENGLISH
Bay
Installation
Equipment required: Power Drill, Screwdriver, Level, Hand Trowel for
Plaster, Silicone Gun, Caulk Gun
1. Construct a main wall framework leaving an opening as shown in
Table C. The base of the frame can be a solid bench/platform, which
will assist in leveling up the appliance when in position.
Table C: Framework Opening Sizes
Physical appliance dimensions should be verified against cut out dimensions BEFORE
installation begins to confirm tolerances align.
W
APPLIANCE
mm [in]
FLEX18BY
460 [18.1]
FLEX32BY
892 [35.1]
FLEX42BY
1147 [45.2]
FLEX50BY
1352 [53.2]
FLEX50BY.BX 1353 [53.3]
FLEX60BY.BX 1608 [63.3]
FLEX68BY 1813 [71.4]
FLEX68BY.BX 1813 [71.4]
FLEX68BY.BX2
1813 [71.4]
FLEX78BY.BX2
2068 [81.4]
FLEX86BY
2272 [89.4]
FLEX86BY.BX
2272 [89.4]
FLEX86BY.BX2
2272 [89.4]
FLEX104BY
2733 [107.6]
FLEX104BY.BX
2733 [107.6]
FLEX104BY.BX2
2733 [107.6]
FLEX122BY 3193 [125.7]
FLEX122BY.BX 3193 [125.7]
FLEX122BY.BX2 3193 [125.7]
FLEX140BY.BX 3653 [143.8]
FLEX140BY.BX2
3653 [143.8]
FLEX158BY
4113 [161.9]
FLEX158BY.BX2
4113 [161.9]
* Appliance weight includes burner/s (dry weight excluding fuel), glass charcoal and glass. It
does NOT include glass charcoal for side boxes.
MPORTANT: The framing above the appliance must be self-
supporting. The appliance is not load-bearing.
www.ecosmartfire.com
D H Weight*
mm [in] mm [in] kg [lbs]
[14.4] 40.7 [89.5]
365 730 [28.7]
[14.4] 51.9 [114.2]
365 730 [28.7]
[14.4] 66.5 [146.3]
365 730 [28.7]
[14.4] 730 [28.7] 71.8 [158]
365
[14.4] 730 [28.7] 76.2 [167.6]
365
[14.4] 730 [28.7] 90.3 [198.7]
365
[14.4] 730 [28.7] 103.6 [227.9]
365
[14.4] 730 [28.7] 95.5 [210.1]
365
365 [14.4] 730 [28.7] 100.2 [220.4]
365 [14.4] 730 [28.7] 114 [250.8]
[14.4] 121.9 [268.2]
365 730 [28.7]
[14.4] 125.9 [277]
365 730 [28.7]
[14.4] 119.2 [262.2]
365 730 [28.7]
[14.4] 152.9 [336.4]
365 730 [28.7]
[14.4] 145.6 [320.3]
365 730 [28.7]
[14.4] 150.1 [330.2]
365 730 [28.7]
[14.4] 730 [28.7] 171.9 [378.2]
365
[14.4] 730 [28.7] 176.7 [388.7]
365
[14.4] 730 [28.7] 169.3 [372.5]
365
[14.4] 730 [28.7] 195.6 [430.3]
365
365 [14.4] 730 [28.7] 200.3 [440.7]
365 [14.4] 730 [28.7] 228.8 [503.4]
[14.4] 219.3[482.5]
365 730 [28.7]
2. Slide the appliance inside the framing cavity (the base of the
appliance can sit directly on top of the 2 x 4 framing material). The
appliance is shipped with red stability bracket(s) installed on the open
side(s) to keep the appliance square while in transport and during
installation. Keep the bracket(s) on while framing up the setting to
assist in minimising movement of the appliance.
3. Ensure that the left and right side edges of the appliance are flush to the
frame-work studs.
4. Secure the appliance to the framework with screws using the
existing mounting holes on the appliance flanges. Make sure that the
appliance is level before securing it in place.
5. Remove the red stability brackets.