Section 1: Specifications - Everlast PowerARC 161STH Operator's Manual

Section 1
PERFORMANCE AND FEATURE COMPARISON
Inverter Type
Input Voltage (±10); Phase/Frequency
Maximum Inrush Amps(I
Maximum Effective (rated running) Amps (I
Duty Cycle @ Rated Amps/Volts
DC Output Range
Open Circuit Voltage
Lift TIG/ HF Start Feature
TIG Pulse
Welding Accessory Package
Current Output Type
Cellulose Electrode Capable (6010,6011)
DINSE Connector Type
Hot Start
Arc Force Control
Voltage Reduction Device (VRD) for Stick
Anti-Stick Function
Maximum Rod Diameter (Stick Electrode)
Dimensions
Weight
Protection Class
Insultation Grade
Input Cable Length
Minimum Recommended Generator Surge Watts
This unit is DC output only. Although technically possible, DC TIG is not recommended for welding aluminum or magnesium.
Specification
max)
1
eff)
1
PowerARC 161STH
Digitally Controlled IGBT
120/240V; 1PH/50-60Hz
29.7A @120V/ 28.8A @ 240V
18A @ 120V/ 17A @ 240V
120V:
TIG: 35% @ 90A/13.6V Stick: 35% @90A/ 23.6V
TIG: 60% @ 70A/12.8V Stick: 60% @70A/22.8V
TIG: 100% @ 55A /22.2V Stick: 100%@55A/22.2V
240V
TIG: 35%@ 160A/16.4V Stick: 35%@160A/26.4V
TIG: 60% @ 130A/15.2V Stick: 60% @130A/25.2V
TIG: 100% @ 100A/14V Stick: 100%@100A/24V
120V:
TIG: 10-90A, 10.4-13.6V Stick: 10-90A, 20.4-23.6V
220V:
TIG: 10-160A, 10.4-16.4V Stick: 10-160A, 20.4-26.4V
70 V
Live Lift, Lift TIG for use with remote switch or foot pedal, and HF start.
(.029-.035 Point Gap recommended)
E-Z, simplified setup with Hz only adjustment (.1-250Hz). Other pulse
parameters are factory optimized for common use patterns.
INCLUDES: Impact resistant carry case, 12.5 ft. 17 series TIG torch with
remote switch, electrode holder (stick) with 10ft cable and connector, work
clamp with 10 ft cable and connector, and brass, floating ball type regulator.
Foot Pedal optional.
DC (±)
Yes, with special selection for E6010 operation.
25/50mm² (DINSE 25 STYLE)
Adjustable Intensity (0-100%) and Duration (0-2 Seconds)
Adjustable (0-100%)
Selectable On or Off (when on, V<24V)
Selectable On or Off.
120V: 3/32" 240: 1/8"-5/32" (depending on electrode type.)
6.5"W x 11.5"H x 16.5"L (165mm W x 292mm H x 420mm L)
25 Lbs. (11.5 KG) Bare Unit Weight.
IP21S
F
6 ft.
7000 Watts. Must be clean power output rated by the generator manufactur-
er. (clean power is considered ≤5% THD) or warranty is void.
IMPORTANT:
9
Specifications