Features; Kill Switch; Pressure Switch - Foxfury Lighting Solutions TAKER B50 Product Manual

FEATURES

KILL SWITCH

The Taker B50 has a Kill Switch located on the TOP LEFT of the Battery
Compartment. This mechanism is used to shut down or disable the shield light.
KILL SWITCH
PRESSURE SWITCH (INCLUDED)
The Taker B50 includes a Pressure Switch that allows the user to place
it anywhere on the shield. This makes it easier to access the Power/Mode
Switch. The Pressure Switch can easily be attached to the shield via Velcro
glue.

PRESSURE SWITCH

CONNECTOR
LIGHT HEAD
CONNECTOR
To connect the Pressure Switch Connector to the Pressure Switch,
simply confirm alignment, insert the connector, and tighten the Screw
Cap.
To connect the Light Head Connector to the Light Head, simply confirm
alignment, insert the connector, and tighten the Screw Cap.
PRESSURE
SWITCH
or
®
7