Heavy Duty Braided Cable; Dual Settings; Retrofit - Foxfury Lighting Solutions TAKER B50 Product Manual

FEATURES (CONT'D)

HEAVY DUTY BRAIDED CABLE

The cable of the B50 is made of steel that protects the internal wiring. The
Black Cable Sleeve (P/N 51-035—included) helps to protect the steel cable
while providing a black covering.

DUAL SETTINGS

The Taker B50 includes two mode settings: the ON/OFF SETTING and the
TACTICAL SETTING. The ON/OFF SETTING simply allows the Light Head to
turn ON and OFF . The TACTICAL SETTING allows you to choose from three
(3) different Operational Modes: Momentary , Continuous On, and
Turbo-Strobe™. The Taker B50 comes in the TACTICAL SETTING.
To change from the TACTICAL SETTING to the ON/OFF SETTING:
With the light turned OFF , press the Power/Mode Switch twice in rapid
succession and hold for 10 seconds. The light should begin to flash. Once
it begins flashing, it is now in the ON/OFF SETTING.
To change from the ON/OFF SETTING to the TACTICAL SETTING:
With the light turned OFF , press and hold the Power/Mode Switch for 10
seconds. The light should begin to go through a slow Turbo-Strobe™ cycle
and then turn OFF . It is now in the TACTICAL SETTING.

RETROFIT

The B50 can retrofit to most ballistic shields without drilling or permanent
modification.
8