Panel Explanation For Vigor2765/Vigor2766 - Draytek Vigor2765 Series Quick Start Manual

2 . P a n e l E
2 . P a n e l E
LED
(Activity)
(DSL)
~
(LAN1/2/3/4)
(USB)
Interface
Factory Reset
USB1~USB2
P1~P4
DSL
I / O
PWR
x p l a n a t i o n
x p l a n a t i o n
Status
Blinking
Off
On
Blinking (Slowly)
Blinking (Quickly)
On
Blinking
Off
On
Blinking
Description
Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press gently and hold
for more than 5 seconds. When the ACT LED blinks rapidly, release the
button. Then the router will restart with the factory default
configuration
Connector for a USB 3G/4G modem, storage, printer or USB
Thermometer
RJ-45 Gigabit Ethernet connectors for local network devices.
LAN port P4 can be configured as the Ethernet WAN port, see Section
5.3 for details
RJ-11 connector for ADSL or VDSL line
Power Switch. Turns the unit on (I) or off (O)
Connector for the power adapter
f o r V i g o r 2
f o r V i g o r 2
Explanation
The router is ready and operating normally
The router is powered off
DSL connection synchronised
DSL connection not currently synchronizing or not
detected
DSL connection is synchronising
Ethernet LAN (RJ45) is connected
Data is transmitting (sending/receiving)
Ethernet LAN is disconnected
USB device is connected and ready for use
Data is being transmitted over USB
2
7 6 5 / V i g o r 2
7 6 5 / V i g o r 2
7 6 6
7 6 6