Mira Vision Owner's Installation Manual page 5

Hide thumbs Also See for Vision:
Table of Contents

Advertisement

10. DO NOT perform any unspecified modifications, drill or cut holes in the product
other than instructed by this guide. When servicing only use genuine Kohler
Mira replacement parts.
11. If the product is dismantled during installation or servicing then, upon completion,
an inspection must be made to ensure all
12. DO NOT operate the product if water is leaking from inside the valve module.
Isolate electrical and water supplies to the product and refer to the fault diagnosis
section.
13. DO NOT apply power to the product if it is thought to have been exposed to
freezing conditions. Isolate electrical and water supplies to the product and
contact Kohler Mira Ltd.
14. Make sure that you fully understand how to operate the product and make sure
that it is properly maintained in accordance with the instructions given in this
manual.
15. This product can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning the use
of the product in a safe way and understand the hazards involved.
16. DO NOT allow children to play with the product.
17. DO NOT allow children to clean or perform any user maintenance without
supervision.
18. Always check the water temperature is safe before bathing or showering.
19. When installing the product to be used as a bath filler ensure the flow rate of the
bath overflow fitted exceeds the flow rate output from the product.
20. DO NOT remotely operate or alter any of this products shower and bathing
settings if it is already occupied and / or being used by another person.
5
1184347-W2-G

Advertisement

Table of Contents
loading

Table of Contents