Ver Scan - Dukane 8950W User Manual

IMAGE menu
It e m
O V E R S C A N
V PO S ITIO N
H PO S ITIO N
(continued on next page)
4 0
Using the ◄/► buttons adjusts the over-scan ratio.
Small (It magnifies picture) ó Large (It reduces picture)
Using the ◄/► buttons adjusts the vertical position.
Down ó Up
• Over-adjusting the vertical position may cause noise to appear on
the screen. If this occurs, please reset the vertical position to the
default setting. Pressing the R E S E T button when the V POSITION
is selected will reset the V POSITION to the default setting.
• When this function is performed on a video signal, the range of
this adjustment depends on OVER SCAN (40) setting. It is not
possible to adjust when OVER SCAN is set to 10.
Using the ◄/► buttons adjusts the horizontal position.
Right ó Left
• Over-adjusting the horizontal position may cause noise to appear on
the screen. If this occurs, please reset the horizontal position to the
default setting. Pressing the R E S E T button when the H POSITION is
selected will reset the H POSITION to the default setting.
• When this function is performed on a video signal, the range of
this adjustment depends on OVER SCAN (40) setting. It is not
possible to adjust when OVER SCAN is set to 10.
D e s c r i p t i o n