Image Menu; Ver Scan - Dukane 8120WIA User Manual

IMAGE menu

IMAGE menu
From the IMAGE menu, items shown in the table
below can be performed.
Select an item using the ▲/▼ cursor buttons, and
press the ► cursor button or ENTER button to
execute the item. Then perform it according to the
following table.
Item
ASPECT
OVER SCAN
(continued on next page)
46
Using the ▲/▼ buttons switches the mode for aspect ratio.
For a computer signal
NORMAL ó 4:3 ó 16:9 ó 16:10 ó NATIVE
For HDMI and MHL signal
TM
NORMAL ó 4:3 ó 16:9 ó 16:10 ó 14:9 ó NATIVE
For a video signal or component video signal
4:3 ó 16:9 ó 16:10 ó 14:9 ó NATIVE
For an input signal from the LAN, USB TYPE A or USB TYPE B
port, or if there is no signal
16:10 (fixed)
• The NORMAL mode keeps the original aspect ratio of the signal.
Using the ◄/► buttons adjusts the over-scan ratio.
Small (It magnifies picture) ó Large (It reduces picture)
• This item can be selected only for a video and component video
signal.
TM
• For HDMI and MHL signal, this item can also be selected if
either (1) or (2) applies.
(1) DIGITAL FORMAT item in the INPUT menu is set to VIDEO.
(2) DIGITAL FORMAT item in the INPUT menu is set to AUTO, and
the projector recognizes that it receives video signals.
Description