Cleaning And Replacing The Air Filter . 1 0 - Dukane 8950W User Manual

Hide thumbs Also See for 8950W:
Table of Contents

Advertisement

Cleaning and replacing the air filter
Please check and clean the air filter periodically. When the indicators or a message
prompts you to clean the air filter, comply with it as soon as possible.
In addition, the extra air filter is attached to inner side of the filter cover. If one of the
filters is damaged or heavily soiled, replace whole filter set with a new one.
Request for a filter set with the following type number from your dealer when
purchasing a new one.
Ty p e n u m b e r : UX 4 1 1 6 1
1.
Turn the projector off, and unplug the power
cord. Allow the projector to sufficiently cool
down.
2.
Use a vacuum cleaner on and around the
filter cover.
3.
Pick and pull up the filter cover knobs to
take it off.
4.
Press up slightly the bottom side knobs
to unlock the bottom side of the filter unit.
Pull the center knob to take the filter unit
off.
5.
Use a vacuum cleaner for the filter vent
of the projector and the outer side of the
filter unit.
6.
Use a vacuum cleaner for the inner side
of each part of the filter unit to clean them
up. If the filters are damaged or heavily
soiled, replace them with the new ones.
7.
Put the filter unit back in an upright state
into the projector.
8.
Put the filter cover back into the place.
(continued on next page)
1 0 0
2
3
Filter cover
knobs
4 , 5
Filter unit
knobs
7
6
Maintenance
Filter cover
Filter unit

Advertisement

Table of Contents
loading

This manual is also suitable for:

8952

Table of Contents