Fastening The Adapter Cover; Using The Security Bar And Slot - Dukane 8950W User Manual

Fastening the adapter cover

Use the supplied adapter cover to prevent
the USB wireless adapter from coming off
easily.
1.
Loosen the screw (marked with
triangle) on the bottom left of the
US B TY PE A port.
2.
Insert the tab of the cover into the
hole at the upper right of the US B
TY PE A port in the direction of the
arrow.
3.
Align the screw holes on the projector
and the cover. Then insert the screw
removed from the projector into the
hole and tighten the screw.
WARNING
to put in the mouth. Heat may build up in the USB wireless adapter, to avoid
possible burns disconnect the projector power cord for more than 10 minutes
before touching it.

Using the security bar and slot

A commercially available anti-theft chain or
wire can be attached to the security bar on
the projector. Refer to the fi gure to choose
an anti-theft chain or wire.
Also this product has the security slot for
the Kensington lock.
For details, see the manual of the security
tool.
WARNING
from falling down, since it is not designed for it.
CAUTION
It may become too hot.
NOTE
• The security bar and slot is not comprehensive theft prevention
measures. It is intended to be used as supplemental theft prevention measure.
►Keep small parts away from children and pets. Take care not
►Do not use the security bar and slot to prevent the projector
►Do not place anti-theft chain or wire near the exhaust vents.
1
3
1 2 . 2 m m
A n t i - t h e f t
c h a i n o r w i r e
S e c u r i t y s l o t
S e c u r i t y b a r
Setting up
2
Tab
1 8 . 6 m m
1 8 . 0 m m
1 7